Pro Series Steam Injection Boilers

The Picture above shows one of our Pro Series 150 gallon Steam Injection Boilers (left) with one of our Pro Series Combination Mash Tun Stripping Stills (right). We only sell Pro Series Steam Injection Boilers in the 150 gallon capacity. This Pro Series Steam Injection Boiler injects sanitary steam directly into the Pro Series Mash Tun Stripping Still for cooking mash and then later for doing the stripping run. The 150 gallon Pro Series Steam Injection Boiler above produces 337 lbs of sanitary steam per hour. The system above reaches operating temperature for stripping in less than 2 hours. The injection boiler above also heats water for mashing. The high temperature centrifugal pump in the picture is used for pumping hot water from the steam injection boiler to the Mash Tun Stripping Still, or any other place in the distillery were hot water is needed. All of our steam injection boilers operate as open systems. All installation including controls must be done by a qualified Licensed Boiler Technician

Features Include:

Stainless Steel SS304 Construction
Stainless is a Full 3mm Thick
150 Gallon Capacity
CIP Spray Ball
Tri Clamp Connections
18" Manway in the Top
Sight Level Tube with Valves
Thermo Wells and Thermometers on the Side and Top
1 1/2"x 2" Thru the Wall Spray Ball for CIP
12" Vent Connection
400,000 BTU Forced Air Burner
5 PSI Pressure Relief Valve
15 PSI ASME Rated Pressure Relief Valve
2 ASME Rated Vacuum Breakers
3" Diameter Steam Injection Pipe Connection
1 HP High Temperature Explosion Proof Centrifugal Pump
48sqft of Heat Exchanger Surface Area

Price $8,800.00

To See Our Catalog with all of our different products CLICK HERE

Above is one of our 150 gallon Pro Series Jet Burner Fired Steam Injection Boilers with a High Temperature Centrifugal Pump for pumping hot water.

Above is one of our 150 gallon Forced Air Burner Fired Pro Series Steam Injection Boilers (left) with a 300 gallon Custom Pro Series Combination Mash Tun Stripping Still Spirit Still.